Pneumatic Tools & Accessories

3HP 250L/min 115PSI V-Type Double Cylinder Air Compressor Pump Head Single Stage Description: 3HP 115PSI V-Type Double Cylinder Air Compressor Pump Head Specifications: l Power: 2200W, 3HP l Cylinders: 65*2 l Exhaust Capacity: 250L/min (8.8cfm) l Discharge Pressure: 8 bar (115 PSI) l Speed: 1050 rpm l Air Compressor Applications: Factory, Home Improvement, Auto Repair, Painting, etc. l Note: When the engine speed is 2880 rpm, the diameter of the motor is 10 cm. When the engine speed is 1440 rpm, the engine is 20 cm. Model: V-0.25/8 HP: 3PS3 Maximum pressure: 115PSI Pulley diameter: 250MM Nozzle thread: American 3/4-16 (thread outer diameter: 19mm) RPM: 1000-1100 RPM Compression pump: Single-stage Features: l High efficiency, high precision, universal, low energy consumption. l High-quality material, not easily damaged. l Strict balance support and correction to ensure smooth operation of the main engine. l Special valve steel is used for the hairpieces, which has good strength and toughness at high temperatures. l Faster inflation and low noise. l Strong cooling blade, good cooling performance. Packing List: 1 x Air Compressor Pump Head Installation Instructions: 1. When installing the pump head, the motor and pulley must be in a straight line. The more aligned, the less vibration. 2. Tighten the screws (including the base and pulley screws). 3. After installing the screws, the belt must be tightened. If the belt is loose, move the motor. After tightening the screws, reinstall the belt. 4. The new machine must be filled with engine oil before starting, and the engine oil must be added to the center of the red dot on the oil level. 5. The pump head rotates clockwise. If it rotates counterclockwise, adjust it in a timely manner. 6. Change the oil for the first half a month, the second one and a half months, and the next two to three months. 7. Replace the air filter regularly. Under normal conditions, it should be replaced every two to three months; under adverse conditions, it should be replaced every month. 8. Operating the machine generates high temperatures; be careful not to burn yourself!